|
Aircraft Test Equipment
Product Literature
Electrical Test Equipment
Electronic Test Equipment
Hydraulic Test Equipment
Development Test Lab Equipment
Fuel Component Test Equipment
Aircraft Meters
T477W Bonding Meter Information
K225 and T53 Modulation Meter
Information
Aircraft Load Banks
Information Request Form
CONTACT US
Phone:
(216) 642-1230
Fax:
(216)
750-5107
E-Mail:
Avtron Aerospace, Inc.
|
Avtron Aerospace, Inc. News
|
Announcing K825B/UnivATE Upgrades |
^ Back to Top |
|
The K825B/UnivATE
Test Stand has been enhanced to include self test capability and dual
boot for DOS and Windows.
1.
Adapter
Self-Test Capability
ensures fast and easy identification of intermittent faults within the
UnivATEs adapters. Troubleshooting is simplified and the self-test
confirms whether or not the problem is due to a faulty adapter. The adapter self-test eliminates the risk of returning a faulty unit
back into service. It minimizes costly delays of flights due to aircraft
on ground (AOG) conditions.
2.
visExec
Upgrade and Data Analysis K825B/UnivATE
customers can now utilize dual-boot system executives that allow
operation of both MegaBasic (DOS) and visExec (Windows) modes.
Users can install
the latest test software onto their test stand for current and future
component testing, while still being able to run legacy software.
Upgrades that allow
a dual-boot executive for operation in both Windows 98 and Windows XP
are available when applicable. Avtron recommends a one (1) week startup
for these upgrades.
Software Assisted
Data Analysis is also included. Users can analyze
test results to identify the source of a component problem. This
ensures units are quickly returned to service, increasing uptime.
Contact your Avtron
Aerospace, Inc regional sales manager for further information on all of
the K825B/UnivATE upgrades.
visExec
and UnivATE
are trademarks of Avtron Aerospace, Inc.
Windows98 and Windows XP are trademarks of Microsoft Corp. |
|
New UnivATE Software Demonstration Videos |
^ Back to Top |
Avtron
Aerospace, Inc. introduces the
new visExec software for the UnivATE. Avtron is now offering to all
of its existing K825B/UnivATE users and all new UnivATE
users the
Avtron visExec software.
visExec is fully Windows XP that
offers a true point and click environment. The visExec
software has extended advanced troubleshooting including our newest
data analysis system. Current users still can use all of their
existing hardware and adapters. To learn more and
see an interactive video of our newest software, please
click here.
visExec
and UnivATE
are trademarks of Avtron Aerospace, Inc.
|
|
Avtron and Bauer Announce
Business Alliance |
^ Back to Top |
|
 |
Avtron Aerospace, Inc. of
Independence, Ohio and Bauer, Inc.
of Bristol, Connecticut have formed a
strategic business alliance. Avtron and Bauer have
joined forces to offer their customers... |
-
Growth opportunities. Grow your business, increase
capabilities, and reduce costs through...
Workshop consultation services based on decades of combined
knowledge.
Regional technical service centers that provide installation,
calibration, preventive maintenance, and training services.
Outsourcing non-core test equipment support, maximizing core
production time.
-
A single source for test equipment. In one comprehensive
source, find all your aircraft component/system test equipment
and support needs including...
Hydraulic
Fuel
Pneumatic
Electrical power generation and distribution
Motor dyno
Rotary and linear actuator
Electrical/electronic control
Wheel and brake repair
-
Uniform operator interface and report format. A Shared or
Common operator interface and consistent test data format result
in...
Reduced training requirements
Common technical support
|
Avtron is recognized worldwide
as an industry leader in aircraft component/system test
equipment for support of hydraulic, power generation,
electrical/electronic control, and flight components.
Bauer
is recognized worldwide as an industry leader in aircraft
component/system test equipment for support of fuel,
pneumatic, electro-mechanical, and flight components. |
|
|
Avtron Supplies Equipment for Boeing 787 Production |
^ Back to Top |
Avtron will be supplying multiple hydraulic test systems for the new Boeing 787 production line in Seattle,
Washington, U.S.A. They include portable and stationary equipment solutions from the H100 and H400 Series of hydraulic products. Some
equipment will be used to perform computer controlled hydraulic 'flush of the 787 wings and fuselage. This equipment will
ensure the major 787 sections have uncontaminated hydraulic systems before final 787 assembly occurs. Additional
equipment will be used to perform hydraulic full system tests following final 787 assembly. These tests will exercise the various 787 hydraulic systems up to 5,000 PSI.
Avtron has been a supplier to Boeing for over 40 years and is proud to be a contributor to the continued success of Boeing and the future success of the 787 program.
|
|
Boeing
Selects Avtron for 787 Systems Integration Lab (SIL) Equipment |
^ Back to Top |
|

Boeing 787 Systems Integration Lab Hydraulic Test Equipment. |
Avtron recently shipped hydraulic pump test equipment
to Boeing's 787 lab in Seattle, Washington, U.S.A.
The new Avtron Drive Stands are part of our H500
series product line. The equipment will be used to perform crucial tests on
787 hydraulic pumps in a lab environment. The lab will provide critical data
on flight component reliability and assist in 787 system integration. The
lab will also provide many decades of support to Boeing 787 customers
worldwide.
|
|
Avtron Hydraulic Test Products Assigned National Stock Numbers |
^ Back to Top |
|
Avtron is proud to announce the recent
assignment of National Stock Numbers (NSN) to its hydraulic component
test products.
H264 Hydraulic Component Test Stand
NSN 4920-01-529-4372
The H264 Hydraulic
Red Oil Test Stand (NSN: 4920-01-529-4372) is capable of testing servo
cylinders, servo load control valves, integrated servo actuators and
many other hydraulic components for military aircraft such as the F-16,
F-15, C-130, etc, at the intermediate and depot level. The H264 utilizes
the Avtron ADAS listed below for full control and data acquisition.
Avtron Data Acquisition System
NSN 4920-01-529-4368
The H700D Avtron Data Acquisition System or
ADAS
(NSN: 4920-01-529-4368) is a computerized front end for existing test
equipment or new Avtron hydraulic test equipment. The ADAS is designed
for manual, semi-automatic, and automatic control as well as data
acquisition for a wide variety of hydraulic, power generation, pneumatic
and fuel component test applications. Real-time graphical user interface
uses National Instruments LabVIEW
and Windows XP
software for point-and-click user operation and programming. The ADAS
provides test reports in graphical and matrix form stored electronically
or with hard copies on a provided color printer.
ADAS is a trademark of Avtron
Aerospace, Inc.
LabVIEW is a trademark of National Instruments.
WINDOWS XP
is a trademark of Microsoft. |
|
FREE Newsletter! |
^ Back to Top |
|

Periodically, Avtron Aerospace, Inc. publishes a newsletter titled IN
PARALLEL, making it available FREE of charge.
Please
download your
FREE copy today with our on-line form or
e-mail* your request to us!
|
|
(*Please include in your request your Company name, complete address, phone, fax, or
e-mail and your name, so we can quickly respond to your request.) |
|
|