|
eliminates the problems associated
with slipping rotors of other types; it uses two cam (eccentric) head
screws. The screws are preloaded into the rotor; simply rotate them
(approximately 90-180°) to fully
engage the shaft (4-6 ft-lbs) using a standard hex (Allen) wrench. Cam screw
rotors are available on
AV850, M56,
M67,
M85, and
M115 THIN-LINE encoders.
Cam Screw Rotor Patent Pending.
Cam Screw Rotor™ is a
trademark of Avtron. |
